Follow us on

Current location:

Home > ChinaCompliance
BESTAO Regulatory Update - China RoHS Enters a New Era

15-November-2026 13:16

Author:admin

Share to--:


BESTAO Consulting | Regulatory Update | November 2026

China RoHS Enters a New Era: 33 Product Categories, Mandatory Standards and Stricter Compliance Requirements

China has significantly strengthened its regulatory framework for restricting hazardous substances in electrical and electronic products (EEPs). With the introduction of a revised product catalogue, updated exemptions and the mandatory national standard GB 26572-2025, manufacturers and importers face important new compliance obligations, particularly from 1 August 2027.


The latest changes represent one of the most substantial developments in China's RoHS regime since the introduction of China RoHS 2.0 in 2016. They expand the range of regulated products, strengthen substance restrictions and establish clearer requirements for product marking, documentation and conformity assessment.

For international manufacturers supplying the Chinese market, the coming months provide an important opportunity to review product portfolios, supply chains and existing compliance procedures.


1. The 2026 Catalogue Expands to 33 Product Categories

On 28 May 2026, China's Ministry of Industry and Information Technology (MIIT), together with seven other government departments, published the revised Compliance Management Catalogue for the Restriction of Hazardous Substances in Electrical and Electronic Products (2026 Version) and its accompanying exemption list.

The revised catalogue expands coverage from the original 12 product categories introduced in 2018 to 33 categories, adding 23 new categories while adjusting the scope of certain existing entries.


The newly covered products span three major areas:

Household electrical appliances: including microwave ovens, electric rice cookers, dishwashers, vacuum cleaners, air purifiers, water dispensers and electric water heaters.

Information and communication technology: including servers, network routing and switching equipment, smart speakers, electronic smart locks, smartwatches, earphones and portable power banks.

Health-related and other electronic products: including electronic blood pressure monitors, blood glucose meters, hearing aids, electric toys and certain lighting products.


The expansion reflects China's intention to address hazardous substances across a wider range of electrical and electronic products, including emerging digital technologies and increasingly sophisticated consumer devices.

For products already covered by the 2018 catalogue, the revised catalogue applies from 28 May 2026. Newly added categories benefit from a transition period, with the relevant requirements applying from 1 August 2027, based on the manufacturing date.


2. GB 26572-2025 Establishes Mandatory Requirements


A major regulatory development is the publication of GB 26572-2025, Requirements for Restricted Use of Hazardous Substances in Electrical and Electronic Products.

Published on 1 August 2025 and scheduled to take effect on 1 August 2027, this mandatory national standard replaces the previous recommended standard GB/T 26572-2011 and its amendment.


The new framework distinguishes between two classes of products.

Class I products, which are included in the Compliance Management Catalogue, must comply with both hazardous substance concentration limits and marking requirements.

Class II products, which fall within the general scope of China RoHS but are not listed in the catalogue, must comply with marking and information disclosure requirements. Compliance with the concentration limits is encouraged rather than generally mandatory under this classification.

This distinction is particularly important for international manufacturers. Products outside the catalogue are not automatically exempt from China RoHS obligations.


3. Ten Restricted Substances Align More Closely with EU RoHS

China's updated requirements cover ten restricted substances, bringing the substance list into closer alignment with the EU RoHS Directive.

These include:

  • Lead (Pb)

  • Mercury (Hg)

  • Cadmium (Cd)

  • Hexavalent chromium (Cr(VI))

  • Polybrominated biphenyls (PBB)

  • Polybrominated diphenyl ethers (PBDE)

  • Bis(2-ethylhexyl) phthalate (DEHP)

  • Butyl benzyl phthalate (BBP)

  • Dibutyl phthalate (DBP)

  • Diisobutyl phthalate (DIBP)

The maximum permitted concentration is generally 0.1% by weight in homogeneous materials, except for cadmium, which is limited to 0.01%.

Although these substance restrictions are increasingly aligned with European requirements, compliance with EU RoHS does not automatically demonstrate full compliance with China RoHS.

Differences remain in product coverage, exemption provisions, marking obligations and conformity assessment procedures.

Manufacturers should therefore assess China-specific requirements independently.


4. The 2026 Exemption List Introduces Important Changes

The revised exemption list contains 56 entries, replacing the previous list of 39 exemption scenarios.

The revision draws on international regulatory developments, particularly the EU RoHS Directive and its Annexes III and IV, as well as environmental commitments under the Minamata Convention on Mercury.

Key changes include the deletion of six exemptions, the modification of existing provisions and the introduction of six new exemptions.

For example, certain exemptions for mercury-containing fluorescent lamps have been removed.

A new exemption has also been introduced concerning specified phthalates in components recovered from electronic medical devices and reused for repair or refurbishment.

Manufacturers should not assume that exemptions available under EU RoHS are automatically applicable in China. Each exemption must be assessed against the Chinese list, including its specific application conditions.

The revised Chinese exemption list took effect upon publication in May 2026.

5. Product Marking and Documentation Requirements Are Strengthened

GB 26572-2025 introduces more detailed provisions for hazardous substance marking and information disclosure.

Manufacturers and importers must use the appropriate China RoHS mark and provide information identifying hazardous substances contained in relevant product components.

The standard distinguishes between products meeting the applicable substance limits and products containing substances above those limits, including certain products relying on exemptions.

Information may be provided through product documentation, packaging, electronic instructions, embedded software or company websites, subject to the applicable requirements.

QR codes may facilitate access to hazardous substance information, but do not replace the required product mark.

The standard also strengthens documentation obligations. Manufacturers and importers must retain technical evidence supporting their hazardous substance declarations for at least three years after the product is discontinued.

These requirements make supplier declarations, material information and traceable technical documentation increasingly important.

6. Conformity Assessment Remains Essential

Products included in the Compliance Management Catalogue must undergo conformity assessment.

China RoHS provides two principal compliance routes:

Voluntary certification: assessment through an authorised certification body under the applicable national certification scheme.

Supplier self-declaration: manufacturers or importers demonstrate conformity through the prescribed self-declaration procedure.

Relevant conformity information is disclosed through the official China RoHS public service platform operated under MIIT's framework.

The applicable testing standards include the GB/T 39560 series, which adopts corresponding IEC 62321 methods for determining restricted substances in electrotechnical products.

Importantly, China RoHS conformity assessment should not be confused with China Compulsory Certification (CCC). The two systems have different regulatory purposes and requirements.

7. Key Compliance Deadlines

The implementation of GB 26572-2025 follows a transitional arrangement.

Date

Regulatory milestone

28 May 2026

Revised catalogue applies to previously   covered product categories; updated exemption list takes effect

1 August 2027

GB 26572-2025 becomes effective; new   manufacturing and imports must comply

31 July 2028

End of the transitional period for   qualifying existing stock

1 August 2028

Non-compliant products within the   standard's scope can no longer be placed on the Chinese market


Products manufactured or imported before 1 August 2027 may benefit from transitional provisions allowing continued sales until 31 July 2028.

Manufacturers should carefully distinguish between production dates, import dates and market placement when planning compliance.

8. What Should International Manufacturers Do Now?


BESTAO Consulting recommends that companies supplying electrical and electronic products to China take five immediate actions.

First, review product classification. Determine whether each product falls within the revised 33-category catalogue or the wider scope of China RoHS.

Second, conduct a substance compliance gap assessment. Evaluate materials and components against the ten restricted substances and applicable concentration limits.

Third, reassess exemptions. Verify that any existing exemption remains valid under the revised Chinese provisions.

Fourth, update marking and documentation procedures. Ensure that product labels, hazardous substance information tables, supplier declarations and supporting technical records meet the applicable requirements.

Finally, review conformity assessment arrangements. For catalogue products, determine the appropriate certification or self-declaration route and prepare the necessary evidence before the implementation deadline.

Looking Ahead

China's latest RoHS reforms signal a shift towards broader product coverage, more stringent hazardous substance controls and stronger compliance documentation.

For European and other international manufacturers, the central challenge is no longer simply understanding the restricted substance list. It is ensuring that product classification, exemptions, marking, supplier information and conformity assessment are fully aligned with China's evolving regulatory framework.

BESTAO Consulting supports international companies in navigating Chinese technical regulations, standards and conformity assessment requirements, including China RoHS, CCC certification and product environmental compliance.

Our services include regulatory monitoring, product-specific compliance assessments, standards analysis and tailored advisory support.

For further information, please contact assistant@bestao-consulting.com or visit www.bestao-consulting.com.

Source: BESTAO Consulting, “What's New in China RoHS 2026”, briefing